HFL5x14 HFL6x14 RepairGuide MainBoard Replacement Latest

HFL5x14 HFL6x14 RepairGuide MainBoard Replacement Latest

Useful info:

1. You need a Philips remote control with numeric buttons

2.       See position of main board in service manual in the link below [Download]

3.         Important remote sequence:

Factory Menu

Home 1999 back

Professional Menu

319753mute

SAM Menu

062596OK(or info)

Professional Menu must be set to off.

Professional Menu->Professional Settings->Professional Mode=Off

CSM Menu

123654

        

Steps:

1.       Install new Main board

2.       Turn screen on

3.     If the TV shows Factory Mode message on the top left
       
      Guest remote with Digit: press 0,1,9,9,9,back to change the mode.
      Light Green Service Remote:
            - Press RC6 Guest (to change the remote mode to RC6 Guest)
            - Press 0,1,9,9,9, back

       you'll get the following message
      

4.   Perform NVM Reset the TV to the correct model to make it shows the correct model and also behave correctly

Follow this article


5.       Changing  Model and S/N


       Using Guest remote with Digit
      Turn professional mode off
          Press 319753mute->Advanced ->Professional Mode=Off
                 Choose SKIP INSTALLATION (OTHERWISE THE TV WILL RESET ITSELF)
          Press the BACK button repeatedly to exit out of the Professional menu

      Go into SAM Menu
       Press the TV button to change the Source to TV

       Press this sequence to go into SAM Menu: 0,6,2,5,9,6,OK (if this doesn't work try 0,6,2,5,9,6,i+)
       
        Press Continue to continue

 Go to NVM Editor  (If all the options are greyed out, please exit SAM Menu and go back in into SAM Menu again)

 Go to Service Data

 - Type Number is the Model of the TV - this should've been set correctly by the NVM Reset procedure (eg. 32HFL5014T/12, 65HFL6014, etc) (Verify with the label behind the TV)

 - Production Number is the Serial Number of the TV - please set this to the correct value (ie. FZ.....) (See the label behind the TV)

 Press back many times to quit the SAM Menu


      Turn professional mode on:
       Press 319753mute->Advanced ->Professional Mode=On
       Press back many time to exit Professional Menu

      Using   Light Green Service Remote
      Turn professional mode off
       Press RC6 Setup
       Press the double Cog symbol (between the House[filled] button and House[hollow] buttons)
            
       Navigate to  Advanced ->Professional Mode=Off
                 Choose SKIP INSTALLATION (OTHERWISE THE TV WILL RESET ITSELF)
       Press the BACK button repeatedly to exit out of the Professional menu
 
      Go into SAM Menu
       Press RC6 Guest
       Press the TV button to change the Source to TV
      
       Press 0,6,2,5,9,6,OK (if this doesn't work try 0,6,2,5,9,6,INFO/CSM)
       
        Press Continue to continue

 Go to NVM Editor  (If all the options are greyed out, please exit SAM Menu and go back in into SAM Menu again)

 Go to Service Data

 - Type Number is the Model of the TV - this should've been set correctly by the NVM Reset procedure (eg. 32HFL5014T/12, 65HFL6014, etc) (Verify with the label behind the TV)

 - Production Number is the Serial Number of the TV - please set this to the correct value (ie. FZ.....) (See the label behind the TV)

        Press back many times to quit the SAM Menu


      Turn Professional Menu back on
       Press RC6 Setup
       Press the double Cog symbol (between the House[filled] button and House[hollow] buttons)
           

 Navigate to ->Advanced ->Professional Mode=On

       Press back many time to exit Professional Menu
            

    • Related Articles

    • Mainboard Repair Guide for BDL3230QL, BDL4330QL, BDL4830QL, BDL5530QL, BDL4335QL, BDL4835QL, BDL5535QL

      Document Title MTK5580P2 RepairGuide MainBoard Replacement Latest Purpose Help guide technician in replacing main board Last Updated 21/8/18 Location Knowledge Base\Philips BDL\ MTK5580P2\Repair Guide\ Applicable Models ...

    • Dragon1.5 RepairGuide MainBoard Replacement Latest

      1.       Download the correct Scalar SW from https://westanonline.sharepoint.com/:f:/s/Support/Eu5CmksHWlVcm38ESftrseoBd2vC03BBYwOVbZI7fw19qw?e=oEkttn Pay attention at the bin file, the file name must match the model number of the monitor you need to ...

    • HFL4x14 RepairGuide MainBoard Replacement Latest

      Useful info: 1. You need a Philips remote control with numeric buttons 2. See position of main board in service manual in the link below [Download] 3. Important remote sequence: Factory Menu Home 1999 back Professional Menu 319753mute SAM Menu ...

    • xxHFL5011 RepairGuide MainBoard Replacement Latest

      Parts: Model Main Board Note 32HFL5011T CBPFF8FBA5S Need to check based on SN 32HFL5011T BPRSH8FBA1S Need to check based on SN 40HFL5011T CBPFF8FBA5S Need to check based on SN 43HFL5011T BPRSG8FBX100SX Need to check based on SN 43HFL5011T ...

    • QL3 RepairGuide MainBoard Replacement Latest

      Useful facts: 1.       See position of power board in service manual in the link below https://westanonline.sharepoint.com/:f:/s/Support/Eg2P8vbozPdSqLN_Eku8e8oB6SVhS29Vo6fV7UsH5eqm9g?e=1RrAvT 2.       Important remote sequence: Factory Menu Home ...