BDL3511Q Factory Reset Screen

This procedure will wipe all configurations on the screen.

Enter the factory menu by pressing ‘home 1999 back” in a sequence on the remote control.

A blue screen will appear

Select “Factory Reset”.

Press "OK" to confirm

• Related Articles

• BDL4052E Factory Reset

  This procedure will reset your screen back to the welcome screen and wipe all the apps and settings that has been installed Press Home->Android Settings (default pin: 1234) Signage Display -> System Tools -> Reset

• Dragon 1.0 OSD Factory reset

  Press home button on the remote Scroll down and select configuration 2 Hit the arrow button to go to the right-hand side of the menu and scroll down until you see Configuration 2 reset as per picture: Select Configuration2 reset by pressing OK and ...

• BDL4550D Reset

  Android Reset Resetting the Android will erase all the installed app and settings Go into android menu (Home 1888) Navigate to Settings->Signage Display->System Tools->Factory reset Scaler Setting Reset Home->Configuration 1->Factory Reset

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

• BDL3650Q NVM Reset Procedure

  Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the Screen's assembly process. The NVM image used is dictated by the LCD component (the front part of ...