BDLxx30QL (MTK5580P2) Setup Guide To Play from HDMI/DVI/VGA

BDLxx30QL (MTK5580P2) Setup Guide To Play from HDMI/DVI/VGA

Physical Setup

All the BDLxx30QL MUST NOT be put on portrait as it may shorten its lifespan.
DVI-DVI cable must be shorter than 5m
HDMI-HDMI cable must be shorter than 15m
Power switch must be accessible by user in case if they need to power cycle the unit
If IR control is obscured, you MUST install the IR extender
Interface Adapter or cable with 2 different interface types (eg. HDMI-DVI) may cause issue.

Common Settings

Press Home to open up Settings
Home->General Settings->Eco Mode = Normal
Home->General Settings->Advance Power Management=On
Home->General Settings->Switch On State=Forced On




    • Related Articles

    • xxBDL3050Q 65BDL30552T (QL3.0) Setup Guide To Play from HDMI/DVI/VGA/DP

      Physical Setup All the BDLxx30QL MUST NOT be put on portrait as it may shorten its lifespan. DVI-DVI cable must be shorter than 5m HDMI-HDMI cable must be shorter than 15m Power switch must be accessible by user in case if they need to power cycle ...

    • Dragon 1.0 - Setup Guide - Video Wall

      Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...

    • Phoenix 1.1 Setup Guide - Video Wall - Latest

      Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...

    • Phoenix 1.0 Setup Guide - Video Wall - Latest

      Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...

    • BFL2x14 Setup - Play Image from USB or HDMI Source (if no image in USB) when TV is switched On

      Setup Steps Upgrade the TV to the Latest Software For BFL2x14 models please refer to the SOP in the link below https://support.westan.com.au/portal/en-gb/kb/articles/xxbfl2114-autorun-upg-normal-software-update Configuration: - Go into professional ...