Physical Setup
All the BDLxx30QL MUST NOT be put on portrait as it may shorten its lifespan.
DVI-DVI cable must be shorter than 5m
HDMI-HDMI cable must be shorter than 15m
Power switch must be accessible by user in case if they need to power cycle the unit
If IR control is obscured, you MUST install the IR extender
Interface Adapter or cable with 2 different interface types (eg. HDMI-DVI) may cause issue
Common Settings
Press Home to open up Settings
Home->Configuration 1->Switch On State: Forced On
Home->Configuration 1->Boot On Source=> Set appropriately to HDMI/DVI/VGA/DP
Home->Advanced Option ->HDMI with One Wire: Off
Home->Advanced Option ->Power Save: Mode 3