HFL5x14/HFL6x14 Channel List Randomly Changes

HFL5x14/HFL6x14 Channel List Randomly Changes

Symptoms:
Intermittently some channel will disappear from the Channel list
Sometimes duplicate channel appeared with the frequency definition changed.

Solution
Set the following setting in the TV
Professional Menu (mute left right up down ok)->Upgrade and Clone->Auto Upgrade settings
- Auto Upgrade and clone = off (don't change this for setup with CMND server)
- Auto Clone on Wakeup = off

For office use only:
#17254
#16997

    • Related Articles

    • HFL5x14/HFL6x14 TV randomly turning it self on at 4am

      If your TV randomly turns on at 4 am, please download and install the new software version v205.002.206.001 either from ppds.com or from https://support.westan.com.au/portal/en-gb/kb/articles/hfl5x14-hfl6x14-autorun-upg-normal-software-update

    • xxHFL5014 xxHFL6014 - No Australia in the channel country selection list

      Check that Professional Mode is ON If AU is still missing, this can be solved by either: performing NVM Reset procedure https://support.westan.com.au/portal/en-gb/kb/articles/hfl5x14-hfl6x14-nvm-reset-procedure turning professional mode on but don't ...

    • HFL5x14, HFL6x14 How to change Channel Name

      Open up Professional Menu Navigate to Channel->Manage->select the channel, then press the Option button, you'll see the option to rename the channel there, including HDMI

    • HFL5014/6014/5114/6114 IPTV Showing No Channel

      A couple of things to check: 1. Check if the TV is connected to the network and have an IP Address - Press mute, left, right, up, down, ok to go to professional menu - Navigate to Wireless and Networks -> Settings->View Network Settings Confirm that ...

    • HFL USB Logging

      Step 1. Prepare the USB flash drive Get an empty flash drive and connect it to the PC. In my case the USB flash drive is called “USBFLASH”. In your case it will have a different name. Next step is to format the USB flash drive to FAT32. Select the ...