INF 40 Series - How to Enable Touch

INF 40 Series - How to Enable Touch

Method 1

Press the 🟡 (yellow) button on the remote control to enable/disable touch functions, OR
Press the 🔴 (red) button on the remote control to enable/disable touch functions and the front panel buttons

Method 2

  1. Press the following buttons on the remote control to access the Debug Menu: INPUT, 1, 3, 7, 9
  2. Select Other Settings and press OK.
  3. Set Touch Forbidden setting to OFF.
  4. Press the BACK button repeatedly or follow the on-screen menu to exit out of the Debug menu. 

Method 3

Re-image Android firmware
    • Related Articles

    • INF 40 Series - RepairGuide Mainboard Replacement

      When the panel starts in AT View mode after replacing the mainboard, loading the correct firmware from below will correct this. Firmware Download links INF6540 Firmware Download: [Download] Updated: May 18, 2022 INF7540 Firmware Download: [Download] ...
    • INF 40 Series - Re-image Android Firmware

      Firmware and Software Download links  INF6540 Firmware Download: [Download] Updated: May 18, 2022 INF7540 Firmware Download:  [Download] Updated: May 19, 2022 INF8640 Firmware Download: [Download] Updated: May 19, 2022 Lightcast File Viewer (Can be ...
    • InFocus 40 Series - How to Enable Total Touch Control Menu

      Total Touch Control (TTC) menu tab is the three vertical circles on both left and right sides of the screen. Tap the TTC menu tab on either side of the touch display to show the primary menu icons. Both menu tabs can be moved vertically for the ...
    • INF 50 Series - User Manual

      Web PDF – See attachment below
    • InFocus 50 Series - How to Enable Wifi

      Ensure that the following Touch Hub SI07B IFPD WiFi and Bluetooth Module is installed in the slot underneath the INFxx50 (slightly right to the infocus logo) It should be included in the accessories kit WiFi • Enable the connection by selecting the ...