Android firmware for InFocus 40 series

INF 40 Series - Re-image Android Firmware

INF6540 Firmware Download:
Updated: May 18, 2022

INF7540 Firmware Download: 
Updated: May 19, 2022

INF8640 Firmware Download:
Updated: May 19, 2022

Lightcast File Viewer
(Can be loaded after firmware update is complete if customer desires)
[Download]
Updated: 13 Jan 2021

Preparing the USB drive

  1. Format a USB drive (FAT32)
  2. Download the file above for the appropriate display
  3. Extract the downloaded file
    1. A folder with the same file name will be created
    2. Inside this folder there is a folder called upgrade_811
  4. Copy the folder upgrade_811 to the root directory of the USB drive (do not change the folders name)

USB drive setup with the Android firmware

  1. Plug the prepared USB stick into USB 2.0 port in to the USB port next to the Ethernet port.
  2. Power off the panel. The power button on the system changes from blue to red
  3. Unplug the power cable from the display for 30 seconds, then plug it back in again.
  4. Verify that the Power button is lit a solid red colour.
  5. Press and hold the power button until firmware upgrading  appears on the screen, and then release the button.
  6. The system starts up and the firmware upgrade will start as indicated below. If the firmware upgrade doesn't start, try a different USB.
  7. Once the firmware update is done, the system will reboot to the “Welcome” Screen. Click on “Start” button to reboot the system.
  8. After the reboot, you may see the same Welcome Screen again. Just press on start to reboot it again
  9. The system will reboot and then goes to the Android home page. This should complete the re-image process.



    • Related Articles

    • INF 40 Series - RepairGuide Mainboard Replacement

      When the panel starts in AT View mode after replacing the mainboard, loading the correct firmware from below will correct this. Firmware Download links INF6540 Firmware Download: [Download] Updated: May 18, 2022 INF7540 Firmware Download: [Download] ...
    • INFxx33E - Panel/Android Firmware Update

      Warning: Updating the image will remove all of your saved files and installed applications as well as reset the panel settings to factory defaults. Once completed the panel will reboot relaunch just like it was originally for initial setup out of ...
    • InFocus 50 Series - How to Update or Re-Image Android Firmware

      Firmware files Download the correct firmware update file. Incorrect file could cause damage to the panel. Click on the 3 vertical dots at the end of the file name and then select Download. Don't click on the Download button in the menu bar. INF6550 ...
    • InFocus 10 Series - How to Update or Re-Image Android Firmware

      Firmware files Download the correct firmware update file. Incorrect file could cause damage to the panel. Click on the 3 vertical dots at the end of the file name and then select Download. Don't click on the Download button in the menu bar. INF5510 [ ...
    • INF 40 Series - How to Enable Touch

      Method 1 Press the ? (yellow) button on the remote control to enable/disable touch functions, OR Press the ? (red) button on the remote control to enable/disable touch functions and the front panel buttons Method 2 Press the following buttons on ...