Setup & Integration
xxBDL505xP (Dragon 1.5) Setting up for RS232
RS232 via DB9 cable Set: Home->Config1->RS232-Routing->RS232 Check the Home->Configuration 2->monitor ID is set to the value that will respond to your SICP command RS232 via Network Set: Home->Config1->RS232-Routing->(LAN->RS232) Set Home->Advanced ...
xxBDL505xP (Dragon 1.5) scheduling setup
Ensure Home -> Advanced option -> Power save = Mode 4 Set the Date & Time Home->Advanced option->Date and time Set Auto sync temporarily to No (so you can change the date and time.) Set Year, Month, Day, Hour, Minute and Daylight Saving time ...
xxBDLxx5xP How to set-up Wifi
Tested USB Wifi Dongle USB Wifi dongle that has been tested to work with xxBDLxx5xP: Type 1 Edimax EW-7722UTn V2 - Android SW need to be updated to FB07.07 version - Check the current Android version by pressing Info,7,7 on your remote and check the ...
Fusion Signage Installation Guide for P-Lines (xxBDL505xP)
Update Screen's Android Module Software Updating the screen (xxBDL505xP) software to the latest version solve some of the known issues which exist with previous version of the android software. Follow the link below to Update the xxBDL505xP's Android ...
xxBDL505xP (Dragon 1.5) - Playing content from USB Drive using the build in Media Player
Portrait Mounting This display can be installed in portrait position. 1. If the table stand is attached, remove it first. 2. Rotate the display clockwise by 90°. The “ ” logo should be on the LEFT side when facing the display. 3. Set the following ...