Infocus 50 Series uses Touch Hub SI07B IFPD WiFi and Bluetooth Module It can be inserted into the slot under the Screen. The Module can be purchased from computer stores. Office Use Only #12397
Pres the input, followed by 1379 Go to Machine Settings Change the Channel auto switch from On to off Also ensure HDMI - CEC is off. Office Use Only #13982
Ensure that the following Touch Hub SI07B IFPD WiFi and Bluetooth Module is installed in the slot underneath the INFxx50 (slightly right to the infocus logo) It should be included in the accessories kit WiFi • Enable the connection by selecting the ...
Connect the screen to the Internet and update firmware to the latest version. Navigate to Settings ⇒ System ⇒ System Update ⇒ Check Update Download the correct firmware patch (enables support for Google Play Store) on the following page and follow ...
Model# Dimensions W x D x H (mm) Weight (kg) INF6550 1488 x 86 x 897 38 INF7550 1709 x 86 x 1020 49.5 INF8650 1957 x 86 x 1159 64.6 (R. Page, personal communication, Jan 23, 2023)
Firmware files Download the correct firmware update file. Incorrect file could cause damage to the panel. Click on the 3 vertical dots at the end of the file name and then select Download. Don't click on the Download button in the menu bar. INF6550 ...
Enter the Service Menu by pressing the following buttons on the remote: INPUT, 1, 3, 7, 9 Once in the Service Menu, there is an option to enable and disable Android =>
The Signa S1 sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal, follow these instructions to re-establish the connection: 1. Turn on your sound bar. 2. Press and ...
To reset your device: - turn it on - press and hold the button "POWER", "SOURCE" and "VOL+" on the top of the product for at least 10 seconds. - After this, all settings of the Bar are erased.
NOTE: The MagniFi Mini sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal, follow these instructions to re-establish the connection: 1. Turn on your sound bar. On ...
Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...
How to Unlock a "Touch Locked" Screen When Touch Locked, it will prompt for Password Default password is 123 (in earlier production run, the code was 666 - so try that too) If the touch lock password has been changed, you need to either: - contact ...