24BDL4151T Set Burn in off

Go to factory setting to turn off the “Burnin” mode:

Press menu, source, source into the factory menu

• Related Articles

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

• BDL3650Q Installing An APK and Set It As Custom App

  Steps 1. Copy your .apk file to an USB stick 2. Put the USB stick in the monitor 3. open the admin menu: press in a sequence home 1888 on the remote control ( within 2 seconds) Default PIN is 1234 4. Select APPS 5. Select File Manager 6. Select USB ...

• BDL4650D Installing An APK and Set It As Custom App

  Steps 1. Copy your .apk file to an USB stick 2. Put the USB stick in the monitor 3. open the admin menu: press in a sequence home 1888 on the remote control ( within 2 seconds) Default PIN is 1234 4. Select APPS 5. Select File Manager 6. Select USB ...

• Customer B - BDL4550D How to Set Screen's Schedule

  Home ⇾ Advanced Option ⇾ Date & Time Ensure Auto Sync is set to Enabled (ticked) Time zone is set correctly (to your timezone) Home ⇾ Advanced Option ⇾ Schedule ⇾ Action Setting up the Schedule You can configure up to seven schedules. To enable the ...

• Customer B - BDL4050D How to Set Screen's Schedule

  Home ⇾ Advanced Option ⇾ Schedule ⇾ Action Setting up the Schedule You can configure up to seven schedules. To enable the configured schedule, you must TICK the box, on the left of the Schedule number For Fusion Signage, Input must be set to Custom. ...