BDL3117P - SDM-L Installing and Setting Up Fusion

BDL3117P - SDM-L Installing and Setting Up Fusion


Alert

SDM-L can't be controlled using Philips remote control.
To control it you need to connect a USB Keyboard and Mouse


Preparation

Download the Fusion Signage 2.4.0 from the following link

Copy it to the root directory of a USB Drive formatted with FAT32 Format

BDL3117P - connect power
SDM-L inside the BDL3117P
- connect to ethernet cable
- insert USB for keyboard and mouse
- insert the USB Drive prepared above

Installation

Insert the USB to the SDM-L


Click-Hold and Swipe Up to Show Installed Android Apps


Click "Explorer"


Find the fusion signage apk and click it

Choose "install"


Once installed
Note down the Fusion identity (SDM-L need to be connected to the internet)
Click the screen to bring up SDM-L menu
Click "Settings"
Ensure that Date&Time Timezone is correctly set

Seting Up Auto-Start App

Click The Setting Cog


Click "Accessibility"


Click "Boot the application"


Click "Select startup application"


Choose Fusion Signage App

Done!

    • Related Articles

    • BDL3117P - SDM-L Installing App

      Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the apk and copy it to the root directory of a USB Drive formatted with FAT32 Format BDL3117P - connect ...

    • BDL3117P - SDM-L Installing TeamViewer Host

      Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download Teamviewer Host APK from the following link https://download.teamviewer.com/download/TeamViewerHost.apk Copy ...

    • BDL3117P - SDM-L Installation and Basic Config

      Preparing The SDM-L Setup SDM-L (see below) Install the SDM-L in the SDM-L slot (see below) Configure the xxBDL3117P screen source to SDM-L upon start up Set Source to SDM Menu (press the HOME button on the remote control) ⇾ Configuration 1 ⇾ Switch ...

    • BDL3117P - SDM-L Checking Android Build Number

      Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Check SDM-L Android Build Number Click the "Setting Cog" In the Search Bar at the top, type "about" and click the "About ...

    • BDL3117P - SDM-L Configuring Auto-start App

      Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Prerequisite Android build number must be SDB801-10.0-HDMI-FP20230817 or later Check SDM-L Android Build Number Click the ...