BDL3117P - SDM-L Installing TeamViewer Host
Alert
SDM-L can't be controlled using Philips remote control.
To control it you need to connect a USB Keyboard and Mouse
Preparation
Download Teamviewer Host APK from the following link
Copy it to the root directory of a USB Drive formatted with FAT32 Format
BDL3117P - connect power
SDM-L inside the BDL3117P
- connect to ethernet cable
- insert USB for keyboard and mouse
- insert the USB Drive prepared above
Installation
Insert the USB to the SDM-L
Click-Hold and Swipe Up to Show Installed Android Apps
Click "Explorer"
Find the TeamViewerHost apk and click it
Choose "install"
Assigning Username and password
Once installed
Key in TeamViewer Username and Password
OR
Open Up Chrome and open up the TeamViewer Auto assignment URL that has been given to you
Related Articles
BDL3117P - SDM-L Installing App
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the apk and copy it to the root directory of a USB Drive formatted with FAT32 Format BDL3117P - connect ...BDL3117P - SDM-L Installation and Basic Config
Preparing The SDM-L Setup SDM-L (see below) Install the SDM-L in the SDM-L slot (see below) Configure the xxBDL3117P screen source to SDM-L upon start up Set Source to SDM Menu (press the HOME button on the remote control) ⇾ Configuration 1 ⇾ Switch ...BDL3117P - SDM-L Installing and Setting Up Fusion
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the Fusion Signage 2.4.0 from the following link ...BDL3117P - SDM-L Android SW Re-Image using USB A to USB A cable
Warning As the Android SW is re-imaged, any existing app and configuration that's been done will be erased and reset SDM-L Android SW Re-Image involves pressing a small button on the SDM-L Hardware itself This necessitate the removal of the Philips ...BDL3117P - SDM-L Checking Android Build Number
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Check SDM-L Android Build Number Click the "Setting Cog" In the Search Bar at the top, type "about" and click the "About ...