BDL3117P - SDM-L Installing App

BDL3117P - SDM-L Installing App


Alert

SDM-L can't be controlled using Philips remote control.
To control it you need to connect a USB Keyboard and Mouse


Preparation

Download the apk and copy it to the root directory of a USB Drive formatted with FAT32 Format

BDL3117P - connect power
SDM-L inside the BDL3117P
- connect to ethernet cable
- insert USB for keyboard and mouse
- insert the USB Drive prepared above

Installation

Insert the USB to the SDM-L


Click-Hold and Swipe Up to Show Installed Android Apps


Click "Explorer"


Find the apk and click it

Choose "install"


Once installed
Swipe down to bring the Cog "Setting" symbol
Go to "Settings"->Apps->Choose your app
Make your app to be the home screen app

Ensure that Date&Time Timezone is correctly set

Seting Up The Screen


Press the Home button on the remote to bring up the screen menu
Configuration 1
 Switch on State = Power On
 Panel Saving->Pixel Shift = auto
 Boot on source = SDM

Configuration 2
 HDMI = EDID 1.4

Options
 Power save = Mode 1
 SDM Setting = Auto


    • Related Articles

    • BDL3117P - SDM-L Installing and Setting Up Fusion

      Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the Fusion Signage 2.4.0 from the following link ...

    • BDL3117P - SDM-L Configuring Auto-start App

      Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Prerequisite Android build number must be SDB801-10.0-HDMI-FP20230817 or later Check SDM-L Android Build Number Click the ...

    • BDL3117P - SDM-L Installing TeamViewer Host

      Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download Teamviewer Host APK from the following link https://download.teamviewer.com/download/TeamViewerHost.apk Copy ...

    • BDL3117P - SDM-L Android SW Re-Image using USB A to USB A cable

      Warning As the Android SW is re-imaged, any existing app and configuration that's been done will be erased and reset SDM-L Android SW Re-Image involves pressing a small button on the SDM-L Hardware itself This necessitate the removal of the Philips ...

    • BDL3117P - SDM-L Installation and Basic Config

      Preparing The SDM-L Setup SDM-L (see below) Install the SDM-L in the SDM-L slot (see below) Configure the xxBDL3117P screen source to SDM-L upon start up Set Source to SDM Menu (press the HOME button on the remote control) ⇾ Configuration 1 ⇾ Switch ...