BDL4052E Normal upgrade to Latest Software

BDL4052E Normal upgrade to Latest Software

Introduction

Perform this Update only if the current screen's SW is FB02.09T or higher.

To check the SW version, press info,7,7. The firmware version is FBxx.xx

If your screen's software is older than FB02.06T, please follow this procedure instead, which is a bit more complex
https://support.westan.com.au/portal/en-gb/kb/articles/bdl4052e-forced-upgrade-to-latest-sw


Software update (update.zip)

Format the USB Drive with the following settings:

  File system=FAT32

  Allocation unit size = 64 kilobyte

Download the latest update.zip into USB Drive.


the latest version is FB02.09T 

Download and put files into the root directory of the USB Drive.

Performing the Android SW update


Plug in the USB drive to the screen.
Press the HOME button on the remote controller
Select "Android settings" or press the remote control sequence HOME, 1, 8, 8, 8 to access the Android menu: 
Enter the password (default 1,2,3,4)

Navigate to Settings ⇾ Signage Display ⇾ System Updates ⇾ Local update and press OK to initiate the firmware update.
The screen will restart upon completion of the firmware update.

Some USB drives do not get detected by the screen. If the screen fails to recognise the update file, try a different USB drive.

Verify the firmware has been updated by pressing INFO, 7, 7 buttons on the remote.

Installing Correct Version of TeamViewer Host app

To be able to remotely control the screen via Teamviewer session, the original Teamviewer app that came with the screen need to be uninstalled, and the version TeamViewerHost_signed_4052E.apk need to be installed afterwards.

Please follow the SOP in this link https://support.westan.com.au/portal/en-gb/kb/articles/bdl4052e-teamviewer