BDL4550D Wifi disabled whenever the screen is put on standby

BDL4550D Wifi disabled whenever the screen is put on standby

This is a known bug and is solved with firmware FB01.07
To check the current Firmware version running on the screen, press Info-77
If the Screen SW is below FB01.07, please update it by following the instruction in this article


    • Related Articles

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • BDL - Android Base Screen - Logging

      The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...

    • BDL3650Q Setting Up Wifi

      Note BDL3650Q require USB Wifi Dongle (not provided) to connect to Wifi USB Wifi Dongle: CRD22 To Configure Wifi (when the USB Wifi Dongle is inserted into the Screen): Press Home 1888 to go into Android menu If password is requested to go into ...

    • BDL4650D Setting Up Wifi

      Note 32BDL4650D require USB Wifi Dongle (not provided) to connect to Wifi Other sizes (43BDL4650D, 50BDL4650D, 55BDL4650D, 65BDL4650D, 75BDL4650D, 86BDL4650D, 98BDL4650D have wifi built in. USB Wifi Dongle: CRD22 To Configure Wifi (when the USB Wifi ...

    • xxBDL4150D Unstable wifi issue

      Issue: Wifi intermittently disconnected. Solution: Update Screen Scaler Software to the latest version: https://support.westan.com.au/portal/en-gb/kb/articles/xxbdl4150d-himalaya-2-0-scaler-fw-upgrade-with-usb Note: It's a good idea to update the ...