FSMPv2 - When device is set to portrait in the device rotation, it always revert back to landscape after reboot (when using a non-fusion app)

• Related Articles

• Fusion Signage Installation Guide (Minix)

  Fusion Signage Installation Guide (Minix) Change Minix setting Enter Minix's Android Settings - Personal -> Security Unknown Sources = On - System -> Date&Time Automatic Date&Time = On Automatic Time Zone = Off Choose your Time Zone - Device -> HDMI ...

• FSMPv2 - Clear Device Storage

  Using the remote control Press home to bring the android menu Go to the Menu button (6 square at the bottom middle of the android interface) -> settings (cog)->Device preferences->App->Fusion Signage->Clear Storage This will generate a new id of your ...

• FSMPv2 - Changing Orientation to Portrait

  Make sure: - You are using the FSMP Remote    - the remote has a working battery - point the remote to the FSMP device (NOT THE SCREEN) Press the OK button to bring up the Fusion Signage menu Select Settings, then click OK Select Screen Orientation, ...

• FSMP - Reset the device

  Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...

• FSMPv2 - Device appears offline

  Press the OK button to bring up the Fusion Signage menu If you see the word "offline" that means the Fusion Signage is not connected to the internet. Check that you can access the internet from the device by: - Pressing the Home button - Navigate to ...