FSMPv2 - Clear Device Storage
Using the remote control
Press home to bring the android menu
Go to the Menu button (6 square at the bottom middle of the android interface) -> settings (cog)->Device preferences->App->Fusion Signage->Clear Storage
This will generate a new id of your Fusion Signage instance. Migration to the new id need to be done in the fusion portal.
Related Articles
FSMPv2 - Device appears offline
Press the OK button to bring up the Fusion Signage menu If you see the word "offline" that means the Fusion Signage is not connected to the internet. Check that you can access the internet from the device by: - Pressing the Home button - Navigate to ...
FSMP - Reset the device
Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...
FSMPv2 - Reset The Device
Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...
FSMPv2 - Hard Reset The Device
Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...
FSMPv2 - When device is set to portrait in the device rotation, it always revert back to landscape after reboot (when using a non-fusion app)
This is a known issue which is fixed with FSMPv2 20221202 or later Latest SW and update procedure can be found in this article https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-updating-the-sw Office Use Only: #9928