10BDL3051T - Hotkeys - How to get int to Admin Mode, Quick Info, Enable touch, Turn on Screen, etc

10BDL3051T - Hotkeys - How to get int to Admin Mode, Quick Info, Enable touch, Turn on Screen, etc

Table of Hotkeys


Note:-
1. Disabling touch function is only valid through SICP command.
2. Turning off the screen is only valid by
- SICP command or
- Settings -> Display -> Sleep or
- Settings -> Signage Display -> Schedule -> End Time
3. Turning on the screen is only valid by
- Hotkey
- SICP command or
- Settings -> Signage Display -> Schedule -> Start Time if the screen is off.
4. Mouse , touch and physical keyboard cannot wake up the screen.

Example:

Enter Admin Menu (press Menu and Vol- button together)

 

Key in password: 1234 (default)

 



    • Related Articles

    • 24BDL4151T - Hotkeys - How to get int to Admin Mode, Quick Info, Enable touch, Turn on Screen, etc

      Table of Hotkeys Note:- 1. Disabling touch function is only valid through SICP command. 2. Turning off the screen is only valid by - SICP command or - Settings -> Display -> Sleep or - Settings -> Signage Display -> Schedule -> End Time 3. Turning on ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • BDL - Android Base Screen - Logging

      The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...

    • 10BDL4551T How to turn off and on touch

      Turn Off touch To turn off touch, you need to send SICP Over IP command to the screen Command SICP Command (HEX) Turn Touch Off 06 01 00 1E 00 18 Turn Touch On 06 01 00 1E 01 19 Turn On Touch To turn on touch, you can send SICP Over IP command above ...

    • xxBDL4051D (Dragon 1.6) - Fusion Quick Install From Android Clone File

      Download the files and directory structure from the link below and put them into USB Drive (formatted with FAT32) https://westanonline.sharepoint.com/:f:/s/Support/Er2CsRpZgWNQhPr_kocCOrgBiLQkf7pLTcApGaQNkOZflQ?e=cOdade Insert the USB Drive as per ...