Philips BDL3651T Series - Common Procedures

BDL3651T - Common Procedures

How to perform a factory reset:

This function allows you to clear all user data and settings. Only the data stored in the internal storage will be cleared and cannot be recovered, the data includes the device settings, installed APPs, APPs’ data, downloaded files, music, photos and all data under”/data”. However, the data stored on the USB and SD card will not be cleared.
  1. Access the OSD menu by pressing the HOME button on the remote 
  2. Access the Android menu. Password is 1, 2, 3, 4
  3. Navigate to Settings -> Signage Display -> System Tools -> Reset
  4. Highlight Factory Reset and press OK.
  5. Press OK to confirm.
  6. Wait for the system to reset and auto reboot.

    • Related Articles

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • BDL3117P - Common Configuration

      Menu (press the HOME button on the remote control) Configuration 1 ⇾ Switch on State = Force on // When power is restored to the screen, the screen automatically turns on Configuration 1 ⇾ Boot on Source // This is where you set the screen's default ...

    • Customer B - BDL4550D Menu Board Common Troubleshooting Steps

      Wifi issues Step 1 - Turn the screen of at the powerpoint leave it off for 10-15 minutes and then turn it back on again before trying to connect it back to the wi-fi. Step 2 – If rebooting the screens doesn’t work try turning of the router/modem for ...

    • BDL - Built in TeamViewer stuck at "Activating TeamViewer..."

      This is likely due to the TCP/UDP port 5938 required by TeamViewer being blocked in the Firewall. Teamviewer running on Windows and Teamviewer running on Android (such as those installed in the Built in Android BDL) uses different ports. Teamviewer ...

    • Cleaning BDL Products

      Philips does not prescribe the use of any alcohol/solvents/cleaners on the screen as this can cause damage to the anti-glare coatings, and we are not qualified to recommend cleaning procedures. Update  see link below  How to keep equipment clean ...