BDL4050D BDL4051T 65BDL3051T Apps that uses HTTPS protocol stopped working

• Related Articles

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

• BDL SICP Commonly Used Protocol (V 1.89 onwards)

  Command SICP v1.99 Command (HEX) Power On 06 00 00 18 02 1C Power Off 06 00 00 18 01 1F Input HDMI 09 00 00 AC 0D 00 01 00 A9 Input HDMI2 09 00 00 AC 06 00 01 00 A2 Input HDMI3 09 00 00 AC 0F 00 01 00 AB Input HDMI4 09 00 00 AC 19 00 01 00 BD Input ...

• How to add apps onto your appcontrol profile (for HFLxx14)

  Go to https://appcontrol.cmnd.pro/ and make sure you are registered for the site Make sure you have followed the procedure as per the attached document to make sure you have the profile set up and agreed to Netflix T&Cs. The portal will only provide ...

• BDL - Built in TeamViewer stuck at "Activating TeamViewer..."

  This is likely due to the TCP/UDP port 5938 required by TeamViewer being blocked in the Firewall. Teamviewer running on Windows and Teamviewer running on Android (such as those installed in the Built in Android BDL) uses different ports. Teamviewer ...

• BDL - Android Base Screen - Logging

  The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...