HFL5x14, HFL6x14 IP Control via SICP

HFL5x14, HFL6x14 IP Control via SICP


    • Related Articles

    • BFL2x14 IP Control via SICP

      Please see this article https://support.westan.com.au/portal/en-gb/kb/articles/bfl2x14-hfl5x14-hfl6x14-ip-control-via-sicp
    • BFL2x14, HFL5x14, HFL6x14 - IP Control via SICP

      This article is applicable for: BFL2x14, HFL5x14, HFL6x14. SICP Protocol over IP for the model above is only supported on the TV FW R205.001.099.000 version onwards SICP Protocol over IP to change the source to custom source (like in BDL Models) is ...
    • BFL2114 - How to change source to app using SICP over IP

      Setting Up Custom Input Source App Go into professional menu by pressing mute, left, right, up, down, ok Navigate to Advanced->Select TV control app->SICP Control There was a special app created for installer to be able to specify the custom input ...
    • BDL4052E - SICP over IP connection disconnection after a Power On command is sent

      Issue: When controlling a BDL4052E using SICP over IP and Power state - Message-Set = On command was sent to the Screen, the TCP/IP Session will get disconnected. Reconnection can only be established after about 1 minute later. Solution: Set ...
    • xxHFLxx14 How to Update Firmware via CMND

      1. Download firmware from https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl5014-xxhfl6014-xxhfl5114-xxhfl6114-autorun-upg-normal-software-update Make sure the downloaded file's name is 'autorun.upg'. 2. Upload it to CMND: go to 'Files' ...