xxBDL4050D xxBDL4051T 65BDL3051T (Dragon 1.0) Wifi keep dropping off
Ensure your xxBDL4050D's Android SW is up to date (see the latest version in the SOP Below)
Android Version FB10.07 and lower did have this issue which is already fixed if the latest SW version is applied to the screen.
To check the SW version:
1. Press in sequence “Home, 1, 8, 8, 8” to enter the Android Menu and Click “Settings”.
2. Choose “About”, you'll see the android version displayed under BUILD NUMBER
Related Articles
Philips BDL Remote Control Not Working
Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...xxBDLxx5xP How to set-up Wifi
Tested USB Wifi Dongle USB Wifi dongle that has been tested to work with xxBDLxx5xP: Type 1 Edimax EW-7722UTn V2 - Android SW need to be updated to FB07.07 version - Check the current Android version by pressing Info,7,7 on your remote and check the ...BDL - Dragon 1.0 (xxBDL4050D) - Android Module Software Update
PHILIPS D Line Android Module Software Update Check if the screen is already running the latest Software version (FB11.04). Press in sequence "info, 7, 7", check if the Android FW Version is FB11.04 Download the latest Android firmware: ...Dragon 1.0 - Setup Guide - Video Wall
Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...xxBDL4050D xxBDL4051T 65BDL3051T (Dragon 1.0) TeamViewer / App can't get connected
Possible Issue: 1. Network Connection Issue Ethernet - check your ethernet cable is plugged in properly and connected to the correct switch/router at the back end - check if the DHCP server is working properly by testing ...