xxBDLxx5xP Checking Network and Internet Connection

xxBDLxx5xP Checking Network and Internet Connection

Checking Network Connection


Press Home 1888 to get into the Android Menu

Select Network

Choose the appropriate Network type
Ensure that it is enabled



Checking if you can access the Internet


Press Home 1888 to get into the Android Menu


Choose Apps



Choose Chromium
Then enter a web page URL to test.


    • Related Articles

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • xxBDL4150D fail to recognize network connection

      We've experienced issue before where the screen failed to recognise the existence of network connection. This seemed to be due to the VLAN/QoS setting at the switch. solution:  Changed QoS settings to port based and set all to highest priority

    • xxBDL4050D (Dragon 1.0) - Network setup

      Set Up Screen's Network Fusion Signage is a cloud base signage solution. A reliable connection to the Internet is required to ensure that it work properly Enter Android Menu (Press: Home, 1, 8, 8, 8 [within 2 seconds]) Select “Network” Select your ...

    • BDL4052E There is no internet on the screen

      If you are installing Philips E-line at a school and you plug the internet cable into the internet port at the side of the screen and get no internet, please check with the school's IT network administrator. There is a possibility that a proxy is ...

    • BDL - Android Base Screen - Logging

      The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...