BDL3511Q Settings

BDL3511Q Settings



Settings required

Home->Option->Auto Signal Detection->On

Home->Option->Date And Time = Set accordingly
Home->Option->Power Save = Mode 3 (screen will automatically detect when video source is back on, and turn on the screen again)

For playing from USB, using USB autoplay, please refer to the article below:

    • Related Articles

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • xxBDL3010Q Settings

      Settings required Home->Option->Auto Signal Detection->On Home->Option->Date And Time = Set accordingly Home->Option->Power Save = Mode 3 (screen will automatically detect when video source is back on, and turn on the screen again) For playing from ...

    • How to Set Up and Troubleshoot Slideshow Playback on Your Philips Q Line Display

      File Compatibility: Ensure that the USB device contains media files in the correct formats supported by the Q Line displays. Supported media formats for videos include MP4, AVI, and MOV. For images, supported formats are JPEG, PNG, and BMP. File ...

    • BDL - Android Base Screen - Logging

      The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...

    • BDL - xxBDL3550Q - Setting up for RS232

      RS232 via DB9 cable Set: Home->Config1->RS232-Routing->RS232 Check the Home->Configuration 2->monitor ID is set to the value that will respond to your SICP command RS232 via Network Set: Home->Config1->RS232-Routing->(LAN->RS232) Set Home->Advanced ...