BDL4152E Logging In Using NFC

BDL4152E Logging In Using NFC

This is applicable for the BDL4152E EDLA FW version ONLY (Google Play Android version)

To change the firmware from non EDLA version (AOSP) to EDLA version, you need to follow this SOP


Assigning an NFC Tag
On the Settings → Multiple User page, you will find “Add NFC” and “Show NFC” buttons next to each user's name.
1. Press “Add NFC”

2. Hold the NFC tag (to be assigned to that user) near the device's NFC antenna.

3. Click “Save” to store the NFC payload onto the tag, linking it to the corresponding user.

4. Press “Show NFC” to view the saved NFC payload data. Each user can be assigned their own unique NFC tag.

Important Notes
  1. How to Log In: When the user is on the screen lock page (e.g., after pressing the power key), they can hold their assigned NFC tag near the NFC antenna. The system will automatically switch to and log in the corresponding user.
    1. Screen Lock Only: Please note that NFC login is only supported from the screen lock page. It will not work on other unlock screens or during permission requests.
  2. After a Reboot: After the system reboots, you must manually unlock the device to enter the system. NFC unlock cannot be used.
    1. Non-Admin Users & Reboots: If the device was switched to a nonAdmin user account before rebooting, the system will automatically revert to the Admin user profile upon restart. NFC unlock cannot be used.
    2. After a reboot, logging in as any user requires a manual unlock. Even after manually unlocking and logging in as the Admin user, you still cannot use NFC login to switch to other users. At this time, a prompt window will appear, informing you that due to the system reboot, that user must be manually unlocked first before NFC can be used to switch to their account.

Office use only:#26698

    • Related Articles

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • BDL - Android Base Screen - Logging

      The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...

    • HFL USB Logging

      Step 1. Prepare the USB flash drive Get an empty flash drive and connect it to the PC. In my case the USB flash drive is called “USBFLASH”. In your case it will have a different name. Next step is to format the USB flash drive to FAT32. Select the ...

    • BDL3550Q USB Logging

      Rename an empty txt file to “TPVisionDebug.cookie” Put this file on an empty FAT32 formatted USB stick and connect it to TV while in standby - Logging will automatically start, will be written in “TPVisionDebug” folder - Logging will continue to be ...

    • xxBDL4550D ADB Logging via Network

      Philips signage monitor ADB logging Enable ADB Over Network on the screen Press Home 1888 to go into Android menu Select Settings Go to Signage Display/Digital Signage -> Server Settings->ADB over network and enable it by ticking it Go to Developer ...