SDM-L
BDL3117P - SDM-L Installing App
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the apk and copy it to the root directory of a USB Drive formatted with FAT32 Format BDL3117P - connect ...
BDL3117P - SDM-L Installing and Setting Up Fusion
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the Fusion Signage 2.6.3 from the following link ...
BDL3117P - SDM-L Installing TeamViewer Host
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download Teamviewer Host APK from the following link https://download.teamviewer.com/download/TeamViewerHost.apk Copy ...
BDL3117P - SDM-L Configuring Auto-start App
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Prerequisite Android build number must be SDB801-10.0-HDMI-FP20230817 or later Check SDM-L Android Build Number Click the ...
BDL3117P - SDM-L Android SW Re-Image using USB A to USB A cable
Warning As the Android SW is re-imaged, any existing app and configuration that's been done will be erased and reset SDM-L Android SW Re-Image involves pressing a small button on the SDM-L Hardware itself This necessitate the removal of the Philips ...
BDL3117P - SDM-L Installation and Basic Config
Preparing The SDM-L Setup SDM-L (see below) Install the SDM-L in the SDM-L slot (see below) Configure the xxBDL3117P screen source to SDM-L upon start up Set Source to SDM Menu (press the HOME button on the remote control) ⇾ Configuration 1 ⇾ Switch ...