Setup & Integration
43BDL4051T Using the Touchscreen with an External PC
Use an HDMI cable to connect from the HDMI Output on the PC to the HDMI Input on the screen. Use the USB cable provided with the screen to connect from the USB port on the PC to the USB-B port on the screen (bottom-most port on the side connectivity ...
BDL - xxBDL4050D (Dragon 1.0) - Setting up for RS232
RS232 via DB9 cable Set: Home->Config1->RS232-Routing->RS232 Check the Home->Configuration 2->monitor ID is set to the value that will respond to your SICP command RS232 via Network Set: Home->Config1->RS232-Routing->(LAN->RS232) Set Home->Advanced ...
xxBDL4050D (Dragon 1.0) - Network setup
Set Up Screen's Network Fusion Signage is a cloud base signage solution. A reliable connection to the Internet is required to ensure that it work properly Enter Android Menu (Press: Home, 1, 8, 8, 8 [within 2 seconds]) Select “Network” Select your ...
xxBDL4050D (Dragon 1.0) - Fusion Installation Guide for xxBDL4050D
Please click the following link https://support.westan.com.au/portal/en-gb/kb/articles/fusion-signage-installation-guide-for-xxbdl4050d
xxBDL4050D (Dragon 1.0) - Fusion Quick Install From Android Clone File
Download the files and directory structure from the link below and put them into USB Drive (formatted with FAT32) https://westanonline.sharepoint.com/:f:/s/Support/EgJ5OGQnf-NZpMN5hL_7qxUBQ4bsXm5CMh7IRlLMosI_TA?e=pCK1yF Quick Install From Android ...
Dragon 1.0 - Setup Guide - Video Wall
Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...
xxBDL4050D, xxBDL4051T, 65BDL3051T (Dragon 1.0) Scheduling Setup
Ensure Home -> Advanced option -> Power save = Mode 4 Set the Date & Time Home->Advanced option->Date and time Set Auto sync temporarily to No (so you can change the date and time.) Set Year, Month, Day, Hour, Minute and Daylight Saving time ...
xxBDL4050D, xxBDL4051T, 65BDL3051T (Dragon 1.0) - Playing content from USB Drive
Portrait Mounting This display can be installed in portrait position. 1. If the table stand is attached, remove it first. 2. Rotate the display counter-clockwise by 90°. The “ ” logo should be on the RIGHT side when facing the display. 3. Set the ...
Dragon1.0 Setup Guide - Browser Input Latest
Portrait Mounting This display can be installed in portrait position. 1. If the table stand is attached, remove it first. 2. Rotate the display counter-clockwise by 90°. The “ ” logo should be on the RIGHT side when facing the display. 3. Set the ...